____________________ 
| Product | Description | Price |
 |
The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish. The product cures to a tacky finish for re-coating. Evercoat Mold Release (# 105685) must be used to attain a fully cured surface. Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat. Gel Kote™ is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness. Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. | White Pint Neutral Quart
|
 |
Use as an air-inhibiting agent for Gel Kote™. Spray a light mist over the catalyzed Gel Kote™ to fully cure and eliminate the tacky feel. Can be used as an excellent mold release agent. 8oz. | $6.95ea
|
 |
A general purpose polyester resin. Economical. Has excellent wettability and good strength. Hardner included. Quart. | $7.95ea |
 |
May be used on soft woods, fiberglass and metal. Ideal repair for hulls, decks, cabins and tanks. Seals all boat surface, resists impact and protects against dry rot. |
Quart
|
 |
The finest quality, extra-white plastic waterproof filler for filling dents, scrapes and gouges in wood, metal, fiberglass and concrete. Hardener included. | Quart
Half-Pint |
 |
Fill boat cavities, pontoons and floating dock blocks. Make your own buoy markers. Just mix and pour this foam to fill cavities and increase buoyancy. This 2-lb density foam will increase flotation, insulation and fill gaps. Mix 1:1. This quick formula allows approximately twenty seconds for mixing and pouring. Sets in place in less that 10 minutes. Ready to use in hours. | 16oz Kit $24.95/kit |
 |
Gelcoat repair kit for permanent repair of nicks, gouges and scratches in fiberglass hulls and deck. Color agents included to blend to match exact color of your boat. | 1oz |
 |
Popular color matching agents that blend with polyester resins, epoxy resins, gel paste, polyester fillers / putties and Skid-No-More. Available in the following colors: White, Tropical Red, Sunset Yellow, Brown, Admiral Blue and Black. **Please specify color in 'note' section when ordering. |
1oz $5.45ea |
 |
Handles like clay, bonds like epoxy, and hardens like steel in 20 minutes. Repairs manifolds, exhaust lines, water tanks, and even cures underwater. Can be sanded, painted, drilled, filled, and tapped. Will not dry out after opening. Size: 4oz sticks. | 4oz $9.95ea |
 |
Hardening agent for use with all polyester resins and gel coats. Plastic squeeze tube has graduated measure for mixing convenience. Use this Methyl Ethyl Ketone Peroxide catalyst according to the resin/gel coat label directions. | 11cc tube. $2.25ea |
